S. Wongwises, P. Naphon, 1998, Heat-Mass Transfer and Flow Characteristics of Two-Phase Countercurrent Annular Flow in a Vertical Pipe, International Communications in Heat Mass Transfer, Vol. 25, pp. 819-829.
S. Wongwises, P. Naphon, 2000, Heat Transfer and Flow Characteristics in Vertical Annular Two-Phase Two-Component Flow, Thammasat International Journal of Science and Technology, Vol. 5, No.1, pp. 16-27.
S. Wongwises, W. Duangthongsuk, P. Naphon, 2002, Tube-Side Two-Phase Heat Transfer Coefficients of Refrigerant HFC-134a Flowing Through a Fin-and-Tube Evaporator, International Communications Heat Mass Transfer, Vol. 29, pp. 387-400.
P. Naphon, S. Wongwises, 2002, An Experimental Study on the In-Tube Heat Transfer Coefficients in a Spiral-Coil Heat Exchanger, International Communications Heat Mass Transfer, Vol. 29, pp. 797-809.
P. Naphon, S. Wongwises, 2003, Investigation of the Performance of a Spiral-Coil Finned Tube Heat Exchanger under Dehumidifying Conditions, Journal of Engineering Physics and Thermophysics, Vol. 76, pp. 71-79.
P. Naphon, S. Wongwises, 2005, Heat Transfer Coefficients of a Spirally Coiled Finned Tube Heat Exchanger, International Communications Heat Mass Transfer, Vol. 32, pp. 371-385.
P. Naphon, S. Wongwises, 2005, A study of the heat transfer Characteristics of a Compact Spiral Coil Heat Exchanger under Wet-Surface Conditions, Experimental Thermal and Fluid Science, Vol. 29, pp. 511-521.
S. Wongwises, P. Naphon, 2005, Heat Transfer Characteristics and Performance of a Spirally Coiled Finned Tube Heat Exchanger under Dry-Surface Conditions, Heat Transfer Engineering, Vol. 27, No. 1, pp. 25-34.
S. Wongwises, P. Naphon, 2005, Heat Transfer Characteristics and Performance of a Spirally Coiled Heat Exchanger under Sensible Cooling Conditions", Japan Society of Mechanical Engineering (JSME) International Journal Series B, Vol. 48, No. 4, pp. 810-819.
S. Laohalertdecha, P. Naphon, S. Wongwises, 2007, A Review of Electrohydrodynamic Enhancement of Heat Transfer, Renewable and Sustainable Energy Reviews, Vol. 11, pp. 858-876.
P. Naphon, S. Wongwises, 2006, A Review of Heat Transfer and Flow Characteristics in Curved Tubes, Renewable and Sustainable Energy Reviews, Vol. 10, pp. 463-490.
S. Wongwises, P. Naphon, 2006, Thermal Performance of a Spirally Coiled Finned-Tube Heat Exchanger under Wet-Surface Conditions, Journal of Mechanical Science and Technology, Vol. 20, pp. 212-226.
P. Naphon, B. Kongtragool, 2003, Theoretical Study on Heat Transfer Characteristics and Performance of the Flat-Plate Solar Air Heaters, International Communications Heat Mass Transfer, Vol. 30, pp. 1125-1136.
P. Naphon, 2005, Effect of Porous Media on the Performance of the Double-Pass Flat-Plate Solar Air Heater, International Communications Heat Mass Transfer, Vol. 32, pp. 140-150.
P. Naphon, 2005, On the Performance and Entropy Generation of the Double-Pass Solar Air Heater with Longitudinal Fins, Renewable Energy, Vol. 30, pp. 1345-1357.
P. Naphon, 2005, Study on the Heat Transfer Characteristics of an Evaporative Cooling Tower, International Communications Heat Mass Transfer, Vol. 32, pp. 1066-1074.
P. Naphon, 2006, Study on the Thermal Performance of the Annular Fin under Dry-Surface, Partially Wet-Surface, and Fully Wet-Surface Conditions, International Communications Heat Mass Transfer, Vol. 33, pp. 112-121.
P. Naphon, P. Sriromruln, 2006, Single-Phase Heat Transfer and Pressure Drop in the Micro-fin Tubes with Coiled Wire Insert, International Communications Heat Mass Transfer, Vol. 33, pp. 176-183.
P. Naphon, 2006, Heat Transfer and Pressure Drop in the Horizontal Double Pipes with and without Twisted Tape Insert, International Communications Heat Mass Transfer, Vol. 33, pp. 166-175.
P. Naphon, 2006, Effect of Coil-Wire Insert on Heat Transfer Enhancement and Pressure Drop of the Horizontal Concentric Tubes, International Communications Heat Mass Transfer, Vol. 33, pp. 753-763.
P. Naphon, M. Nuchjapo, J. Kurujareon, 2006, Heat Transfer Coefficient and Friction Factor of the Horizontal Double Tubes with Helical Ribs, Energy Conversion & Management, Vol. 47, pp. 3031-3044.
P. Naphon, 2006, Second Law Analysis on the Heat Transfer of the Horizontal Concentric Tube Heat Exchanger, International Communication in Heat Mass Transfer, Vol. 33 pp. 1029-1041.
P. Naphon, J. Suwagri, 2007, Effect of Curvature Ratios on the Developments of Heat Transfer and Flow in the Horizontal Spirally Coiled Tube, International Journal of Heat and Mass Transfer, Vol. 50, pp. 444-451.
P. Naphon, 2007, Laminar Convective Heat Transfer and Pressure Drop in the Corrugated Channel, International Communication in Heat Mass Transfer, Vol. 34, pp. 62-71.
P. Naphon, 2007, Thermal Performance and Pressure Drop of the Helical-Coil Heat Exchangers with and without Helically Crimped Fins, International Communication in Heat Mass Transfer, Vol. 34, pp. 321-330.
P. Naphon, 2008, Heat Transfer Characteristics and Pressure Drop in the Channel with V-Corrugated Upper and Lower Plates, Energy Conversion and Management, Vol. 48, pp. 1516-1524.
P. Naphon, A. Sookkasem, 2007, Investigation on the Heat Transfer and Flow Characteristics of the Tapered Cylinder Pin Fin Heat Sinks, Energy Conversion and Management, Vol. 48, pp. 2671-2679.
P. Naphon, 2008, Effect of corrugated plates in an in-phase arrangement on the heat transfer and flow developments, International Journal of Heat and Mass Transfer, Vol. 51, pp. 3963-3971.
P. Naphon, K. Kornkumjayrit, 2008, Numerical Analysis on the Fluid Flow and Heat Transfer in the Channel with V-shaped Wavy Lower Plate, International Communication in Heat Mass Transfer, Vol. 35, pp. 839-843.
P. Naphon, P. Assadamongkol, T. Borirak, 2008, Experimental Investigation of Titanium Nanofluids on the Heat Pipe Thermal Efficiency, International Communication in Heat Mass Transfer, Vol. 35, pp. 1316-1319.
P.Naphon, O. Khonseur, 2009, Study on the Convective Heat Transfer and Pressure Drop in the Micro-channel Heat Sink, International Communication in Heat Mass Transfer, Vol. 36, pp. 39-44.
P. Naphon, D. Thongkum, P. Assadamongkol, 2008, Heat Pipe Efficiency Enhancement with Refrigerant-nanoparticles Mixtures, Energy Conversion and Management, Vol. 50, pp. 772-776.
P. Naphon, S. Wiriyasart, 2009, Liquid Cooling in the Mini-rectangular Fin Heat Sink with and without Thermoelectric for CPU, International Communication in Heat Mass Transfer, Vol. 36, pp. 166-171.
P. Naphon, 2009, Effect of Wavy Plate Geometry Configurations on the Temperature and Flow Distributions, International Communication in Heat Mass Transfer, Vol. 36, pp. 942-946.
P. Naphon, S. Ratchaneekorn, J. Kurujareon, 2009, Heat Transfer and Flow Characteristics in the Hard Disk Drive Tester, International Communication in Heat Mass Transfer, Vol. 36, pp. 820-826.
P. Naphon, S. Klangchart, S. Wongwises, 2009, Numerical Investigation on the Heat Transfer and Flow in the Mini-fin Heat Sink for CPU, International Communication in Heat Mass Transfer, Vol. 36, pp. 834-840.
P. Naphon, 2010, Study on the Heat Transfer Characteristics and Pressure Drop in the Channels with Arc-shaped Wavy Plates, Journal of Engineering Physics and Thermophysics, Vol. 83, pp. 1061-1069.
P. Naphon, 2010, Experimental and Numerical Investigations on the Heat Transfer Characteristics in the Channels with Trapezoidal and V-shape wavy Plates, JP Journal of Heat and Mass Transfer, Vol. 3, pp. 199-218.
P. Naphon, 2010, On the Performance of Air Conditioner with Heat Pipe for Cooling Air in the Condenser, Energy Conversion and Management, Vol. 51, pp. 2362-2366.
P. Naphon, S. Mahachon, 2010, Temperature Distribution of Read/Write Head Soldering with Ribbon Cable of HDD, International Communication in Heat Mass Transfer, Vol. 37, pp. 379-384.
P. Naphon, S. Wongwises, 2011, Investigation on the jet liquid impingement heat transfer for the central processing unit of personal computers, International Communications in Heat and Mass Transfer, Vol. 37, pp.822-826.
P. Naphon, T. Suchana, 2011, Heat Transfer Enhancement and Pressure Drop of the Horizontal Concentric Tube with Twisted Wires Brush Inserts, International Communications in Heat and Mass Transfer, Vol. 38, pp. 238-241.
P. Naphon, 2011, Study on the Exergy Loss of the Horizontal Concentric Micro-fin Tube Heat Exchanger, International Communications in Heat and Mass Transfer, Vol. 38, pp. 229-235.
P. Naphon, 2011, Study on the Heat Transfer and Flow Characteristics in a Spiral-Coil Tube, International Communications in Heat and Mass Transfer, Vol. 38, pp. 69-74.
P. Naphon, N. Naphon, 2011, Effect of Ultrasonic Treatments in the Salted Egg Processing, International Journal of Apply Agricultural Research, Vol. 3, pp. 237-248.
P. Naphon, S. Wongwises, 2011, Experimental Study on the Jet Nanofluids Impingement System for Cooling Computer Processing Unit, Journal of Electronics Cooling and Thermal Control, Vol. 1, pp. 1-7.
P. Naphon, S. Klangchart, 2011, Effects of Outlet Port Positions on the Jet Impingement Heat Transfer Characteristics in the Mini-fin Heat Sink, International Communications in Heat and Mass Transfer, Vol. 38, pp. 1400-1405.
P. Naphon, S. Wongwises, S. Wiriyasart, 2012, On the Thermal Cooling of Central Processing Unit of the PCs with Vapor Chamber, International Communications in Heat and Mass Transfer, Vol. 39. pp. 1165-1168.
P. Naphon, S. Wiriyasart, 2012, Study on the Vapor Chamber with Refrigerant R-141b as Working Fluid for HDD Cooling, International Communications in Heat and Mass Transfer, Vol. 39. pp. 1449-1452.
P. Naphon, S. Wongwises 2013, Heat Transfer of Nanofluids in the Mini-rectangular Fin Heat Sinks, International Communications in Heat and Mass Transfer, Vol. 40, pp. 25-31.
P. Naphon, S. Wongwises, S. Wiriyasart, 2013, Application of two-phase vapor chamber technique for hard disk drive cooling of PCs, International Communications in Heat and Mass Transfer, Vol. 40. pp. 32-35.
P. Naphon, 2013, On the vapor chamber with jet liquid impingement cooling system for CPU cooling, International Journal of Engineering and Innovative Technology, Vol. 3. pp. 112-116.
P. Naphon, C. Thongjing, 2014, Pool boiling heat transfer characteristics of refrigerant-nanoparticle mixtures, International Communications in Heat and Mass Transfer, Vol. 52. pp. 84-89.
P. Naphon, 2014, CPU cooling by vapor chamber with R-141b as working fluid, Asian Journal of Engineering and Technology, Vol. 2. pp. 161-167.
P. Naphon, 2014, Thermal efficiency enhancement of domestic cooling pots, Asian Journal of Engineering and Technology, Vol. 2. pp. 424-429.
P. Naphon, L. Nakharintr, 2014, Numerical and experimental study on the heat transfer characteristics in the minichannel heat sinks, Engineering Transaction, Vol. 17. pp. 29-37
P. Naphon, S. Wiriyasart, 2014, On the thermal performance of the vapor chamber with micro-channel for unmixed air flow cooling, Engineering Journal, Vol. 19. pp. 125-137.
P. Naphon, L. Nakharintr, 2015, Turbulent Two Phase Model Approach for the Nanofluids Heat Transfer Analysis Flowing through the Minichannel Heat Sinks, International Journal of Heat and Mass Transfer, Vol. 82, pp. 388–395.
P. Naphon, 2015, Thermal Cooling Enhancement Techniques of Electronic Devices, International Communication in Heat and Mass Transfer, Vol. 61, pp. 140-145.
P. Naphon, L. Nakharintr, 2015, Numerical Investigation on the Laminar Heat Transfer of Nanofluids-cooled in the Minichannel Heat Sinks, Journal of Physics and Thermophysics, Vol. 88, pp. 642-650.
P. Naphon, J. Jongpleampiti, 2015, Study on the Thermal Efficiency and Temperature Distribution of Dan Kwien Kiln in Thailand, JP Journal of Heat and Mass Transfer, Vol. 12, pp. 181-195.
P. Naphon, P. Sriromrern, 2015, Numerical and Experimental Study on the Air Convective Heat Transfer Characteristics of the Micro-channel with Longitudinal Fins, International Journal of Applied Engineering Research, Vol. 10, pp. 37421-37427.
P. Naphon, S. Wiriyasart, 2015, Effect of Sintering Columns on the Heat Transfer and Flow Characteristics of Vapor Chambers, Heat and Mass Transfer, DOI 10.1007/s00231-015-1699-8.
P. Naphon, 2016, Experimental Study on the Nanofluids Convective Heat Transfer Characteristics in Spirally Coiled Tube, Int. J. Heat and Mass Transfer, Vol. 93, pp. 293-300.
P. Naphon, S. Wiriyasart, Effect of Heat Source Area on the Thermal Resistance of the Wick Columns Vapor Chambers, J. Mechanical Science and Technology, Vol. 30, pp. 1-10.
P. Naphon, 2015, Effect of Magnetic Field on the Boiling Heat Transfer of Nanofluids, Int. J. Thermophysics, DOI 10.1007/s10765-015-1993-1.
P. Naphon, T. Arisariyawong, T. Nualboonrueng , Artificial Neural NetworkAnalysis on the Heat Transfer and Friction Factor of the Double Tube with Spring Insert International Journal of Applied Engineering Research, 11 (2016) 3542-3549.
P. Naphon, T. Arisariyawong, HEAT TRANSFER ANALYSIS USING ARTIFICIAL NEURAL NETWORKS OF THE SPIRALLY FLUTED TUBES, Journal of Research and Applications in Mechanical Engineering 4 (2016) 135-147.
P. Naphon, T. Arisariyawong, T. Nualboonrueng, Nanofluids heat transfer and flow analysis in vertical spirally coiled tubes using Eulerian two‑phase turbulent model, Heat Mass Transfer DOI 10.1007/s00231-017-1977-8
S. Wiriyasart P. Naphon, Experimental Investigation on Heat Transfer Impinging Liquid Jet Characteristics of the Vapor Chambers, International Journal of Applied Engineering Research 11 (2016) 2907-2912
P. Naphon, S. Wiriyasart, T. Arisariyawong, T. Nualboonrueng, Magnetic field effect on the nanofluids convective heat transfer and pressure drop in the spirally coiled, Int. J. Heat and Mass Transfer 110 (2017) 739–745.
L. Nakharintr, P. Naphon, Magnetic field effect on the enhancement of nanofluids heat transfer of a confined jet impingement in mini-channel heat sink, Int. J. Heat and Mass Transfer 110 (2017) 753–759.
P. Naphon, S. Wiriyasart, Pulsating TiO2/water nanofluids flow and heat transfer in the spirally coiled tubes with different magnetic field directions, Int. J. Heat and Mass Transfer 115 (2017) 537–543.
L. Nakharinte, P. Naphon, S. Wiriyasart, Eulerian Two Phase Numerical Simulation on Jet Impingement Nanofluids Heat Transfer in Mini-rectangular Fin Heat Sinks, JP Heat and Mass transfer 14 (2017) 511-532.
L. Nakharintr, P. Naphon, S. Wiriyasart, Effect of Jet-Plate Spacing to Jet Diameter Ratios on Nanofluids Heat Transfer in a Mini-Channel Heat Sinks Int. J. Heat and Mass Transfer 116 (2018) 352–361.
P. Naphon, S. Wiriyasart, Experimental Study on laminar Pulsating Flow and Heat Transfer of Nanofluids in Micro-fins Tube with Magnetic Fields Int. J. Heat and Mass Transfer 118 (2018) 297–303.
P. Naphon, S. Wiriyasart, T. Arisariyawong, Artificial Neural Network Analysis the Pulsating Nusselt number and Friction Factor of TiO2/water Nanofluids in the Spirally Coiled Tube with Magnetic Field, Int. J. Heat and Mass Transfer 118 (2018) 1152-1159.
S. Wiriyasart, P. Naphon, Study on Thermal Performance of Cold Plate Unit with Micro-channel for Supercomputer Cooling, JP Heat and Mass transfer 15 (2018) 77-92.
N. Naphon P. Naphon, Salt Diffusion Enhancement in the Salt Pickled Lime Processing by Ultrasonic Treatment Technique, International Journal of Applied Engineering Research, 13 (2018) 4268-4272.
P. Naphon, S. Wiriyasart, Effect of Magnetic Fields on the Pulsating Heat Transfer and Flow of TiO2-water Nanofluids in the Helically Corrugated Tube, International Journal of Heat and Mass Transfer 125 (2018) 1054–1060.
S. Wiriyasart, P. Naphon, Thermal Performance Enhancement of Vapor Chamber by Coating Mini-channel heat sink with Porous Sintering Media, International Journal of Heat and Mass Transfer 126 (2018) 116–122.
P. Naphon, S. Wiriyasart, Confined Impinging Liquid Jet Characteristics of Vapor Chamber Embedded with Heat Sinks, Heat Transfer Research 49 (2018) 1–18.
P. Naphon, L. Nakharintr, S. Wiriyasart, Continuous Nanofluids Jet Impingement Heat Transfer and Flow in a Micro-channel Heat Sink International Journal of Heat and Mass Transfer 126 (2018) 924–932.
P. Naphon, S. Wiriyasart, N. Naphon, Thin Rubber Sheet Drying Curve Characteristics of Fresh Natural Rubber Latex, Int. J. Applied Engineering Research 10 (2018) 8447-8454.
P. Naphon, S. Wiriyasart, Fill Ratio Effect on Thermal Resistance of Vapor Chamber with Different Configuration Structures Int. J. Heat and Mass Transfer, accepted 2018.
P. Naphon, S. Wiriyasart, T. Arisariyawong, L. Nakharintr, ANN, Numerical and Experimental Analysis on the Jet Impingement Nanofluids Flow and Heat Transfer Characteristics in the Micro-channel Heat Sink” International Journal of Heat and Mass Transfer 131 (2018) 329–340.
C. Hommalee, S. Wiriyasart, P. Naphon, Cold-Hot Water Dispenser with Thermoelectric Module Systems, Heat Transfer; Asian Research (2019) 1-9, DOI: 10.1002/htj.21409.
S. Wiriyasart, P. Naphon, C. Hommalee, Sensible Air Cool-Warn Fan with Thermoelectric Module Systems Development, Case Studies in Thermal Engineering 13 (2019) 100369
P. Naphon, S. Wiriyasart, Experimental and Numerical Study on the Thermoelectric Liquid Cooler Module Performance with Different Heat Sink Configurations Heat and Mass Transfer, (Accepted)
S. Wiriyasart, P. Naphon Numerical Study on Air Ventilation in Workshop Room with Multiple Heat Sources, Building and Environment, Case Studies in Thermal Engineering
P. Naphon, S. Wiriyasart, N. Naphon, Effect of TiO2 Nanoparticles Concentrations on the Thermal, Electrical, and Mechanical Properties of Natural Rubber Latex (Int.J. Plastics Technology) Submitted 9 October 2018
S. Wiriyasart, C. Hommalee, P. Naphon, Thermal Cooling Enhancement of Dual Processors Computer with Thermoelectric Air Cooler Module, Case Studies in Thermal Engineering (submitted 27 February 2019)
P. Naphon, T. Arisariyawong, S. Wiriyasart, Adaptive Neuro-Fuzzy Inference System of Friction Factor and Nusselt Number of Pulsating Nanofluids Flow in the Fluted Tube under Magnetic Field International Journal of Heat and Mass Transfer (Submitted 4 March 2019)
A. Siricharoenpanich, S. Wiriyasart, R. Prurapark, P. Naphon, Effect of Cooling Water Loop on Thermal Performance of Air Conditioning System, Case Studies in Thermal Engineering, 15 (2019) 100518.
S. Wiriyasart, C. Hommalee, R. Prurapark, A. Srichat, P. Naphon, Thermal Efficiency Enhancement of Thermoelectric Module System for Cold-Hot Water Dispenser; Phase II, Case Studies in Thermal Engineering, 15 (2019) 100520.
S. Wongwises, P. Naphon, 1998, Flow, Heat and Mass Transfer Characteristics of Two-Phase Countercurrent Annular Flow in a Vertical Pipe, 3rd International Conference on Multiphase Flow, ICMF98, June 8-12, Lyon, France.
P. Naphon, S. Wongwises, 2003, Experimental and Theoretical Investigation of the Heat Transfer Characteristics and Performance of a Spiral-Coil Heat Exchanger under Dry-Surface Conditions, 2nd International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics (HEFAT), June 24-26, Victoria Falls, Zambia.
P. Naphon, S. Wongwises, 2004, On the Performance of a Spirally Coiled Finned Tube Heat Exchanger under Dry-Surface Conditions, The 15th International Symposium on Transport Phenomena, ISTP-15, May 9-13, Bangkok, Thailand.
P. Naphon, S. Tangnikorn, P. Asadamongkon, P. Sriromruln, 2005, Analysis of Heat Transfer Characteristics of the Annular Fin under Partially Wet Surface Conditions, 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT), 19-22 September 2005, Cairo, Egypt.
S. Wiriyasart, P. Naphon, Study on the Heat Transfer Characteristic of the Vapor Chamber without Micro-channel for Cooling Electronic Component, The 3rd International Symposium on Engineering, Energy and Environments (ISEEE), Pullman King Power Hotel, Bangkok: 17-20 November 2013.
L. Nakharintr, P. Naphon, Investigation on the Single Phase Heat Transfer of the Mini-rectangular Channel Heat Sink, The 3rd International Symposium on Engineering, Energy and Environments (ISEEE), Pullman King Power Hotel, Bangkok: 17-20 November 2013.
A. Siricharoenpanich, S. Wiriyasart, A. Srichat, P. Naphon, Thermal Management System of CPU Cooling with a Novel Short Heat Pipe Cooling System, Case Studies in Thermal Engineering, 15 (2019) 100545.
S. Wiriyasart, P. Naphon, Thermal management system with different configuration liquid vapor chambers for high power electronic devices, Case Studies in Thermal Engineering, 18 (2020) 100590.
S. Wiriyasart, C. Hommalee, R. Prurapark, A. Srichat, P. Naphon, Thermal management system with nanofluids for electric vehicle battery cooling modules, Case Studies in Thermal Engineering, 18 (2020) 100583.
P. Naphon, T. Arisariyawong, S. Wiriyasart, A. Srichat, ANFIS for analysis friction factor and Nusselt number of pulsating nanofluids flow in the fluted tube under magnetic field, Case Studies in Thermal Engineering, 18 (2020) 100605.
S. Wiriyasart, P. Naphon, Heat Spreading of Liquid Jet Impingement Cooling of Cold Plate Heat Sink with Different Fin Shapes, Case Studies in Thermal Engineering, xx (2020) 100xxx.
A. Siricharoenpanich, S. Wiriyasart, A. Srichat, P. Naphon, Thermal Cooling System with Ag/Fe3O4 Nanofluids Mixture as Coolant for Electronic Devices Cooling, Case Studies in Thermal Engineering, xx (2020) 100xxx.
S. Wiriyasart, P. Suksusron, C. Hommalee, A. Siricharoenpanich, P. Naphon, Improving the Thermal Performance of Thermoelectric Module with Fe3O4-ferrofluid for EV Battery Cooling Package, Journal of Mechanical Science and Technology, xxx (2020) xxx-xxx
C. Hommalee, S. Wiriyasart, S. Sirikasemsuk, P. Naphon, Thermal Performance of Thermoelectric Module with Water/Nanofluids for Cooling Electric Vehicle Battery System, Manuscript.
Songkran Wiriyasart, Paisarn Naphon, Analytical Analysis of Fully Developed Laminar Flow on Thermal Performance of Plate Fin Heat Sink: Parametric Study for Engineering Design, Manuscript.